Mandrakelinux 10.1 on a MaxData Pro 6100X
Contents
# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.60GHz
stepping : 6
cpu MHz : 1594.832
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe est tm2
bogomips : 3162.11
# lspcidrake -v
intel-agp : Intel Corp.|852GM Host-Hub Interface Bridge [BRIDGE_HOST] (vendor:8086 device:3580 subv:152d subd:0727)
unknown : Intel Corp.|852GM System Memory Controller [SYSTEM_OTHER] (vendor:8086 device:3584 subv:152d subd:0727)
unknown : Intel Corp.|852GM Configuration Process [SYSTEM_OTHER] (vendor:8086 device:3585 subv:152d subd:0727)
Card:Intel 85x : Intel Corp.|852GM/852GME/855GM/855GME Chipset Graphics Controller [DISPLAY_VGA] (vendor:8086 device:3582 subv:152d subd:0727)
Card:Intel 85x : Intel Corp.|852GM/852GME/855GM/855GME Chipset Graphics Controller [DISPLAY_OTHER] (vendor:8086 device:3582 subv:152d subd:0727)
usb-uhci : Intel Corp.|82801DB USB Controller [SERIAL_USB] (vendor:8086 device:24c2 subv:152d subd:0727)
usb-uhci : Intel Corp.|82801DB USB Controller [SERIAL_USB] (vendor:8086 device:24c4 subv:152d subd:0727)
usb-uhci : Intel Corp.|82801DB USB Controller [SERIAL_USB] (vendor:8086 device:24c7 subv:152d subd:0727)
ehci-hcd : Intel Corp.|82801DB USB Enhanced Controller [SERIAL_USB] (vendor:8086 device:24cd subv:152d subd:0727)
hw_random : Intel Corp.|82801 Hub Interface to PCI Bridge [BRIDGE_PCI] (vendor:8086 device:2448)
unknown : Intel Corp.|82801DBM LPC Interface Bridge [BRIDGE_ISA] (vendor:8086 device:24cc)
unknown : Intel Corp.|82801DBM IDE Controller (UltraATA/100) [STORAGE_IDE] (vendor:8086 device:24ca subv:152d subd:0727)
unknown : Intel Corp.|82801DB SMBus Controller [SERIAL_SMBUS] (vendor:8086 device:24c3 subv:152d subd:0727)
snd-intel8x0 : Intel Corp.|ICH4 845G/GL Chipset AC'97 Audio Controller [MULTIMEDIA_AUDIO] (vendor:8086 device:24c5 subv:152d subd:0727)
slamr : Intel Corp.|82801DB AC [COMMUNICATION_MODEM] (vendor:8086 device:24c6 subv:152d subd:0727)
b44 : Broadcom Corp.|BCM4401-B0 100Base-TX [NETWORK_ETHERNET] (vendor:14e4 device:170c subv:152d subd:0727)
ipw2200 : Intel Corp.|Intel(R) PRO/Wireless 2200BG [NETWORK_OTHER] (vendor:8086 device:4220 subv:8086 subd:2702)
unknown : O2Micro Inc|OZ711M3 SmartCardBus MultiMediaBay Controller [BRIDGE_CARDBUS] (vendor:1217 device:7223 subv:3401 subd:0000)
unknown : O2Micro Inc|OZ711M3 SmartCardBus MultiMediaBay Controller [BRIDGE_CARDBUS] (vendor:1217 device:7223 subv:3c01 subd:0000)
unknown : O2 Micro, Inc.|OZ711Mx MultiMediaBay Accelerator [SYSTEM_OTHER] (vendor:1217 device:7110 subv:152d subd:0727)
ohci1394 : Texas Instruments|TSB43AB21 IEEE-1394 Controller (PHY/Link) 1394a-2000 [SERIAL_FIREWIRE] (vendor:104c device:8026 subv:152d subd:0727)
hub : Linux 2.6.8.1-12mdk ehci_hcd|EHCI Host Controller [Hub] (vendor:0000 device:0000)
hub : unknown (04b4/6560/ffff/ffff) [Hub]
hub : Linux 2.6.8.1-12mdk uhci_hcd|UHCI Host Controller [Hub] (vendor:0000 device:0000)
hub : Linux 2.6.8.1-12mdk uhci_hcd|UHCI Host Controller [Hub] (vendor:0000 device:0000)
hub : Linux 2.6.8.1-12mdk uhci_hcd|UHCI Host Controller [Hub] (vendor:0000 device:0000)
# lsusb
Bus 004 Device 002: ID 04b4:6560 Cypress Semiconductor Corp.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
# cat /proc/ide/hd*/model
TOSHIBA MK6025GAS
QSI DVDRW SDW-042
Working
Touchpad
ACPI
Cpufreq
It was not working out of the box, I had to edit line 63 of /etc/init.d/cpufreq to get :
if [ "$model" = "9" -o "$model" = "15" -o "$model" = "13" ]; then return 0; fi
USB
Sound
Modem
I used slmodem-2.9.10-5mdk from Mandrakeclub and it worked fine.
Network
Wireless
I updated to ipw2200 0.12 as 10.1 only ships with 0.7 and the
driver really improved since.
CD/DVD burner
Works fine with CD-R, not yet tested on DVD±R(W)
PCMCIA
Did not get configured automatically. I had to install pcmcia-cs, and then edit /etc/sysconfig/pcmcia.
Content is now :
PCMCIA=yes
PCIC=yenta_socket
PCIC_OPTS=do_scan=0
CORE_OPTS=
CARDMGR_OPTS=-f
Firewire
ieee1394: Error parsing configrom for node 0-01:1023
ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
ieee1394: Error parsing configrom for node 0-00:1023
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
ieee1394: Node added: ID:BUS[0-00:1023] GUID[0010b9f70089bd97]
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins
scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
Vendor: Maxtor Model: OneTouch Rev: 0200
Type: Direct-Access ANSI SCSI revision: 06
SCSI device sda: 585938944 512-byte hdwr sectors (300001 MB)
sda: cache data unavailable
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 p8 >
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
# hdparm -tT /dev/sda
/dev/sda:
Timing buffer-cache reads: 2776 MB in 2.00 seconds = 1386.13 MB/sec
Timing buffered disk reads: 68 MB in 3.07 seconds = 22.15 MB/sec
IrDA
Transferring files from/to my mobile phone works fine.
Partially working
Graphics card
2D is fine, except display gets corrupted when switching to external screen under X.
3D fails but I didn't look at the problem yet.
Not yet tested TV out.
Update With xorg-x11-6.8.1-3mdk (Cooker) 3D works fine and I do not need anymore to restart X after switching to external screen, switching vt is enough.
Untested
Card reader
This page is listed on TuxMobil, the reference site for Linux on laptops, notebooks, PDAs and mobile phones